fabric composite custom expansion joints

Call Toll-Free! 1 (888) 376-FLEX
6864 Chrisphalt Drive - Bath, PA 18014
Tel. (610) 837-3812 - FAX (610) 837-3813

   


When designing a new plant layout, after the structural steel and ducting system has been laid out, anchor points should be located so that the ducting movements can be calculated for both the design and maximum excursion temperatures.

Our expansion joints can handle combined axial, lateral and rotational movement with a single unit. Joint locations should be carefully selected to minimize the amount of units required to absorb the total duct movement with the layout.

Angular Movement of Expansion Joints

Angular Movement

Axial Movement of Flexible Duct Connectors

Axial Movement

Lateral Movement of Expansion Joints

Lateral Movement

Rotation of Flexible Duct Connectors
Rotation

It is always a good idea to evaluate an existing expansion joint replacement or repair in order to confirm that all materials, applications and ducting requirements have not changed since initial installation.

Installed properly, our products help eliminate costly expansion joint repairs, increase operating efficiency and help extend plant operation time.

We take pride in our expansion joint construction to provide our customers with the highest quality product at the most economical pricing; delivered on time.

No wonder our satisfied customers refer to us as "The Flexible Connection for Dependability"

 
 

Call Toll-Free! 1 (888) 376-FLEX   

We're in a New Facility! Click for Details.

| products | materials | design | accessories | repair | gallery | newsletter | site map | contact us |
| u-belts | metal bellows | flat belts | sleeve | custom shapes |

Expansion Joints:   Types of Expansion Joints | Metal Bellows vs. Fabric Expansion Joints

Metal Expansion Joints / Metal Bellows Design Elements | Heat, Pressure & Movement | Vibrations | Spring Rate & Elasticity | Movement Stresses

U-Belt Fabric Expansion Joints Design Elements | Heat and Pressure | Materials | Moisture and UV | Chemical Attack

Composite Flat Belt Expansion Joints Design Elements | Heat and Pressure | Abrasion Resistance | Movement | Protective Accessories

FLEXCOM · 6864 Chrisphalt Drive  Bath, PA 18014
toll free  888-376-FLEX ·  tel 610-837-3812 ·  fax  610-837-3813  ·  e-mail Info@flexcomonline.com
Last update on 03/04/09